PP/mPE/clay水交聯奈米複合材料之製備與性質研究

CCUR > College of Natural Science and Engineering > College of Engineering > College of Engineering > Chinese Culture University Hwa Kang Journal of Engineering > Item 987654321/22019

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/22019

题名:	PP/mPE/clay水交聯奈米複合材料之製備與性質研究
作者:	郭韋麟周賢民陳文智賴森茂
贡献者:	工學院
关键词:	聚丙烯 mPE 黏土矽烷水交聯機械性質熱性質奈米複合材料 Polypropylene mPE Clay Silane Mechanical properties Thermal properties Nanocomposites
日期:	2008-06-01
上传时间:	2012-04-11 14:26:57 (UTC+8)
摘要:	本研究中PP/Metallocene polyethylene/clay奈米複合材料(PP/mPE/clay)之製備，使用DCP(Dicumyl peroide)為起始劑，DBTL (Dibutyin Dilaurate)作為催化劑，VTEOS (Vinyl Triethoxy Silane)當交聯劑，在混煉機中先進行mPE接枝矽烷交聯劑，再和clay掺混，然後與PP進行掺混，最後熱壓成薄片，以70℃水浴進行水交聯。奈米複合材料掺入比例以mPE為100 phr，clay為2、5、9 phr，觀察添加不同clay比例時交聯和未交聯對材料的機械性質，熱性質和微觀構造的影響。 In this paper we present Polypropylene (PP)/metallocene lyethylene(mPE)/clay nanocomposites. Metallocene polyethylene was grafted with vinyl triethoxy silane first and then followed by the mixing of which with PP and clay. The clay incorporation was 2, 5, and 9 parts per hundred resins of mPE. The crosslinking reaction was conducted at 70℃ in the presence of water. The effect of curing on the mechanical properties and thermal properties was investigated.
關聯:	華岡工程學報 22期 p.209 -217
显示于类别:	[College of Engineering] Chinese Culture University Hwa Kang Journal of Engineering

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	255	检视/开启

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....