資料載入中.....
|
請使用永久網址來引用或連結此文件:
https://irlib.pccu.edu.tw/handle/987654321/20525
|
| 題名: | Nitrogen dilution effect on the flammability limits for hydrocarbons |
| 作者: | Wang, TC (Wang, Tzu-Chi)
Chen, CC (Chen, Chan-Cheng)
Liaw, HJ (Liaw, Horng-Jang)
Chen, HC (Chen, Hui-Chu) |
| 貢獻者: | 化材所 |
| 關鍵詞: | Upper flammability limit
Lower flammability limit
Inerting
Fire safety |
| 日期: | 2009 |
| 上傳時間: | 2011-11-30 13:27:17 (UTC+8) |
| 摘要: | Theoretical models to predict the upper/lower flammability limits of hydrocarbons diluted with inert nitrogen gas are proposed in this study. It is found that there are linear relations between the reciprocal of the upper/lower flammability limits and the reciprocal of the molar fraction of hydrocarbon in the hydrocarbon/inert nitrogen mixture. Such linearity is examined by experimental data reported in the literature, which include the cases of methane, propane, ethylene and propylene. The R-squared values (RI) of the regression lines of the cases explored are all greater than 0.989 for upper flammability limit (UFL). The theoretical slope of the predictive line for lower flammability limit (LFL) is found to be very close to zero for all explored cases; and this result successfully explains the experimental fact that adding inert nitrogen to a flammable material has very limited effect on LFL Because limit oxygen concentration (LOC) could be taken as the intersectional point of the UFL curve and LFL curve, a LOC-based method is proposed to predict the slope of the UFL curve when experimental data of UFL are not available. This LOC-based method predicts the UFL with average error ranging from 2.17% to 5.84% and maximum error ranging from 8.58% to 12.18% for the cases explored. The predictive models for inert gas of nitrogen are also extended to the case of inert gas other than nitrogen. Through the extended models, it was found that the inert ability of an inert gas depends on its mean molar heat capacity at the adiabatic flame temperature. Theoretical calculation shows that the inert abilities of carbon dioxide, steam, nitrogen and helium are in the following order: carbon dioxide > steam > nitrogen > helium; and this sequence conforms to the existing experimental data reported in the literature. (C) 2008 Elsevier B.V. All rights reserved. |
| 顯示於類別: | [化學工程與材料工程學系暨碩士班] 期刊論文
|
文件中的檔案:
| 檔案 |
描述 |
大小 | 格式 | 瀏覽次數 |
|---|
| index.html | | 0Kb | HTML | 287 | 檢視/開啟 |
|
在CCUR中所有的資料項目都受到原著作權保護.
|
